• Model NO.：PE-UV-3D
• Laser Wavelength：Fiber Laser
• Laser Classification：Semiconductor Laser
• Type：Optical Fiber Laser Marking Machine
• Marking Method：Scanning Marking
• Minimum Character：0.2mm
• Spot Diameter：1.0mm(+,-0.1)
• Power Demand：100-240V Single Phase, 50-60Hz
• Pulse Repetition Frequency：10-120kHz
• Transport Package：Sea-Worthy Packing or Air-Worthy Packing
• Specification：ISO9001&CE
• Trademark：Perfect Laser
• Origin：China
• HS Code：8456100090
• Production Capacity：100 Set,Month

Basic Info.

Model NO. PE-UV-3D Laser Wavelength Fiber Laser Laser Classification Semiconductor Laser Type Optical Fiber Laser Marking Machine Marking Method Scanning Marking Minimum Character 0.2mm Spot Diameter 1.0mm(+/-0.1) Power Demand 100-240V Single Phase, 50-60Hz Pulse Repetition Frequency 10-120kHz Transport Package Sea-Worthy Packing or Air-Worthy Packing Specification ISO9001&CE Trademark Perfect Laser Origin China HS Code 8456100090 Production Capacity 100 Set/Month

Product Description

                                     3D UV Laser Marker Machine For Ceramics Plastic Marking
                                                                                                   Model:PE-UV-3D

Product IntroductionThe 3D dynamic uv laser marking machine is one of the series of laser marking machines, but it is developed with 355nm UV laser. The uv laser marking machine uses intracavity frequency doubling technology compared with infrared laser. The 355 UV focusing spot is very small and can greatly reduce the mechanical deformation of materials and have little influence on processing heat. Because the uv laser marking machine is mainly used for ultra-fine marking and engraving, it is especially suitable for high-speed division of food, medical packaging materials, micropores, glass materials, and complex graphic cutting of silicon wafers. 

The uv laser marking machine adopts imported core components and is equipped with high-speed and high-precision 3D galvanometer. Combined with the 3D special software and control system independently developed by our company, it can perfectly realize the fine processing of any curved surface workpiece without the focus phenomenon; The uv laser marker can also be used for deep engraving. The focus tracking in real time makes the processing efficiency and quality better than the traditional 2D marking machine. Realize the full realization of 3D marking function, leading laser processing into a new era. The three-dimensional UV laser machine adopts imported high-quality ultraviolet laser source. The 355nm uv light focuses on the spot, and the processing heat affected zone is very small. It is suitable for processing materials with large thermal radiation response. The uv laser marking machine is mainly used for superfine marking and special material marking,carving and cutting. Widely used in the high-end market of ultra-fine laser processing. 


Product Features1. The uv laser marking machine has stable performance, small volume, low power consumption, high electro-optical conversion efficiency and long service life; 
2. The laser spot output is very small, and the light mode is good, which is suitable for occasional markings such as fine graphics; 
3. The laser beam quality is good, the output laser stability is high, the marking effect is easy to debug; 
4. The uv laser marking machine has high average power and high repetition frequency, marking speed is faster; 
5. The uv laser marking machine adopts marble working platform, which has good earthquake resistance and stress resistance, good flatness and high stability; 
6. The product subverts the traditional 2D marking mode, achieving a variety of 3D marking modes such as bevel, step, cylinder, cone, spherical, and stretched surface; 
7. The uv laser marking machine can achieve super large center angle marking, on the cylinder can hit the 117 ° center angle position.. 
8. On the marking workpiece, the target marking pattern is perfectly presented to avoid deformation such as elongation and tilt. Let the engraved pattern be closer to the original form. 
9. Let the marking boundary no longer be "ignored"! The marking effect of each position on the workpiece is uniform and consistent; 
10. 355nm output wavelength reduces the thermal impact on the workpiece, the heat affected area is very small, there is no thermal effect, the material is not deformed and not burnt; 
11. The uv laser marking machine adopts the upper and lower sliding door closed processing in the design, and the uv laser marker uses the high-quality special filter to protect the plexiglass to make a special observation window to create the ultimate protective performance of the whole machine; 
12. The uv laser marking machine can be equipped with automatic lifting, rotating and other functions. 




Application FieldIt is suitable for processing materials with large thermal amplitude response. It can be matched with production line, automatic loading and unloading, automatic feeding and discharging, mainly used for ultra-fine marking and engraving. It is especially suitable for high-speed division of food, medical packaging and glass materials. Silicon wafers for applications such as complex graphics cutting. 


 FAQ
Q1.: What's the package?
A: We have 3 layers package. For the outside, we adopt wood craft case. In the middle, the machine is covered by foam, to protect the machine from shaking. For the inside layer, the machine is covered by thickening plastic bag for waterproof.
Q2.: Will the package damaged during transportation?
A: Our package is considerate all the damage factors and make it to be safe, and our shipping agent have full experienced in safe tranportation. We have exported to 180 countries worldwide. So please don't worry, you will receive the parcel in good condition.
Q3.: How to install and run the machine?
A: Our technician have installed the machine before shipping. For some small parts installation, we will send detail training video, user's manual along with the machine. 95% customers can learn by themselves.
Q4.: How can I do if the machine goes wrong?
A: If confronted with such problems, please contact us asap and do not try fix the machine by yourself or someone else. We will response within 24 hours as quick as we can to solve it for you.
 
Contact us
Perfect Laser Co., Ltd. (China)
Contact: Daisy / Sales Department
Tel: 0086-27-86791986
MP: 0086-13871253601