Portable 3W 5W 10W Fiber UV Laser Marking Engraving Machine Engraver Marker for Glass Silicone Crystal ABS PCB Ceramic Plastic
Liaocheng Ray Fine Technology Co., Ltd.- Warranty：2 Years
- Laser Visibility：Invisible
Base Info
- Model NO.：RF-UV-3W , RF-UV-5W , RF-UV-10W
- Applicable Material：Nonmetal
- Cooling System：Air Cooling
- Technical Class：Pulse Laser
- Laser Wavelength：Deep Ultraviolet
- Laser Classification：Semiconductor Laser
- Type：Semiconductor Laser Marking Machine
- Marking Method：Scanning Marking
- Portable Name：Portable Small UV Laser Marking Machine
- Application：Marking Engraving Printing
- Laser Source：Nanosecond Laser
- Laser Power：3W 5W 10W
- Wavelength：355nm
- Control Software：Ezcad
- Software Support Format：Ai, Plt, Dxf, BMP, Dst, Dwg, Las, Dxp
- Working Accuracy：0.1mm
- Working Range：100X100mm
- Power Supply：AC110V 60Hz, AC220V 50Hz
- Cooling Way：Air Cooling
- Transport Package：Wooden Box
- Specification：75*41*79cm
- Trademark：Rayfine
- Origin：Shandong China
- HS Code：845611
- Production Capacity：50 Sets Per Month
- Package size per unit product：75.00cm * 41.00cm * 79.00cm
- Gross weight per unit product：60.000kg
- Lead Time：7 days (1 - 1 Pieces)
Description
40KG
Samples by uv laser marking machine
Machine packing: 750x410x790mm, 60KG
1.Clean the machine surface and make sure that the machine surface is clean.
2.Check that there is no problem with the machine, and then wrap the machine with plastic wrap to prevent the machine from scratching.
3.Then it is packed in wooden cases, surrounded by four sides.
4.The gap between the wooden box and the machine is filled with foam plastics to prevent the machine
from moving back and forth.
5.Put all accessories in the wooden box and check whether there are missing accessories.
6.Then seal the wooden box and use steel nails to keep a firm eye on the surrounding of the wooden box to prevent the wooden box fromscattering.
7.Finally, fix the wooden box firmly with a bandage.
Samples by uv laser marking machine
Machine packing: 750x410x790mm, 60KG
1.Clean the machine surface and make sure that the machine surface is clean.
2.Check that there is no problem with the machine, and then wrap the machine with plastic wrap to prevent the machine from scratching.
3.Then it is packed in wooden cases, surrounded by four sides.
4.The gap between the wooden box and the machine is filled with foam plastics to prevent the machine
from moving back and forth.
5.Put all accessories in the wooden box and check whether there are missing accessories.
6.Then seal the wooden box and use steel nails to keep a firm eye on the surrounding of the wooden box to prevent the wooden box fromscattering.
7.Finally, fix the wooden box firmly with a bandage.